Multi-Tech Systems MVP210-SS ユーザーズマニュアル

148 

 

cont’d)

 

DID Options (cont’d) 

 

Start Modes  

Immediate Start, 
Wink Start, 
Delay Dial 

For Wink Start, the voip detects 
the off-hook condition.  Then 
the voip reverses battery 
polarity for a specified time 
(140-290 ms; a “wink”) and then 
becomes ready to receive dial 
digits. 
For Delay Dial, the voip detects 
detects the off-hook condition.  
Then the voip reverses battery 
polarity for a specified time 
(reverse polarity duration has 
wider acceptable range than for 
Wink Start) and then becomes 
ready to receive dial digits. 

Wink Timer 
(in ms) 

integer values,  
in milliseconds 

This is the length of the wink 
for Wink Start and Delay Dial 
signaling modes.. 
Applicable only when Start 
Mode parameter is set to “Wink 
Start” or “Delay Dial.” 

 

Inter Digit 
Timer 

integer values, 
in seconds 

This is the length of time that 
the MultiVOIP will wait 
between digits.  When the time 
expires, the MultiVOIP will 
look in the phonebook for the 
number entered.  
Default = 2. 

Message 
Waiting 
Indication 

-- 

Not applicable to DID-DPO 
interface.   

Inter-Digit 
Regeneration 
Timer 

integer values, 
in milliseconds 

This parameter is applicable 
when digits are dialed onto a 
DID-DPO channel after the 
connection has been made.  The 
length of time between the 
outputting of DTMF digits. 
Default = 100 ms.