Multi-Tech Systems MVP210-SS ユーザーズマニュアル

75 

2. Connect the power cord supplied with your MultiVOIP to the power 

connector on the back of the MultiVOIP and to a live AC outlet as 

shown in Figure 3-11.  

 

 

 
3. Connect the MultiVOIP to a PC by using a RJ-45 (male) to DB-9 

(female) cable. Plug the RJ-45 end of the cable into the Command port 

of the MultiVOIP and the other end into the PC serial port. See Figure 

3-11. 

4. Connect a network cable to the ETHERNET 10/100 connector on the 

back of the MultiVOIP. Connect the other end of the cable to your 

network. 

5.  For an FXS or FXO connection. 

(FXS Examples:  analog phone, fax machine, Key Telephone System.) 

(FXO Examples:  PBX extension, POTS line from telco central office.) 

Connect one end of an RJ-11 phone cord to the Channel 1  FXS/FXO 

connector on the back of the MultiVOIP.       

Connect the other end to the device or phone jack.