Motorola SBG940 ユーザーズマニュアル
48
SBG940 User Guide
X
Exit
Print
Gateway > PORT TRIGGERS — predefined Page
When you run a PC application that accesses the Internet, it communicates with a computer on the Internet. In
some applications, especially gaming, the computer on the Internet also communicates with your PC. Because
NAT does not normally allow these incoming connections, the SBG940 supports port triggering.
some applications, especially gaming, the computer on the Internet also communicates with your PC. Because
NAT does not normally allow these incoming connections, the SBG940 supports port triggering.
The SBG940 is preconfigured with port triggering for common applications. You can also configure additional port
triggers if needed. Configuring port triggers for an application requires:
triggers if needed. Configuring port triggers for an application requires:
•
The application transport protocol — TCP or UDP
•
The application port number
You can use the default values for the remaining parameters.
LAN IP Address
Sets the private LAN IP address for the port forwarding page. An Internet user must know
the public IP address to access any port forwarding entry you define on the private LAN.
the public IP address to access any port forwarding entry you define on the private LAN.
Enable
Select this box to enable the port forwarding entries to be accessed through NAT.
Add
Click to add the virtual server to the PORT FORWARDING list.
PORT FORWARDING
Displays the configured custom virtual servers.
Gateway > PORT FORWARDING — config page fields (continued)
Field
Description