Motorola SBG940 ユーザーズマニュアル
50
SBG940 User Guide
X
Exit
Print
Gateway > PORT TRIGGERS — custom Page
Use this page to create a custom port trigger:
Gateway > PORT TRIGGERS — custom page fields
Field
Description
ADD NEW SPECIAL
APPLICATION
APPLICATION
Name
Enter the unique name for the port trigger. This is typically the protocol.
Enable
Select this box to enable the custom port trigger.
Protocol
Sets the transport protocol for the port trigger — TCP or UDP.
Port Range
(From:To)
(From:To)
Sets the port range for the port trigger. Type the start of the range in the left field and the end in
the right field.
the right field.
Session Chaining
Enable session chaining if the application needs to open one or more ports in different ranges to
operate properly. The options are Disable, TCP, or TCP/UDP.
operate properly. The options are Disable, TCP, or TCP/UDP.
Session Interval
Sets the session interval for the application:
•
If the port triggers detect traffic on the Port Range within the Session Interval, it is considered
to be related to the initial session.
to be related to the initial session.
•
If the port triggers detect traffic on the Port Range after the Session Interval expires, it is
considered to be a new and unique session.
considered to be a new and unique session.
Address Replace
Sets the address replacement method for the application.
Multi Host
Select if appropriate for the application.
Add
Click to add the port trigger to the PORT TRIGGERS TABLE.