Xerox SquareFold ユーザーズマニュアル

SquareFold Trimmer User Guide

6

Overview

1.

2.

3.

4.

5.

The Square Fold Settings are found on the SquareFold 
Trimmer Module control panel. The settings can be switched 
on or off based on user preference. When the settings are 
switched on, you can select one of five options depending on 
your requirements for the finished booklet job:

+2: Use this setting when you want the most amount of 
pressure applied to the spine of the booklet. The more 
pressure applied to the booklet, the more square the booklet 
spine will be. +2 is the greatest amount of pressure that can 
be applied to the booklet.

Additionally, you may want to select this setting when your 
finished booklet is five pages or less and on heavier weight 
paper (200 g/m² or greater).

+1: Use this setting when you want a greater amount of 
pressure applied to the spine of the booklet, but not as much 
pressure as the +2 setting uses.

5.

4.

3.

2.

1.

Auto: This is the machine default setting and is used for 
most jobs.

-1: Use this setting when you want less pressure applied to 
the spine of the booklet. The less pressure applied to the 
booklet, the more rounded the booklet spine will be.

-2: Select this setting when your finished booklet is five pages 
or less and on lighter weight paper (100 g/m² or lower). -2 is 
the least amount of pressure that can be applied to the 
booklet.

Choose the setting that best fits your needs for the booklet 
output.