Xerox SquareFold ユーザーズマニュアル
SquareFold Trimmer User Guide
4
Overview
1a.
1b.
1c.
1d.
1.
2.
2a.
2b.
2c.
2d.
3.
3a.
3b.
3c.
3d.
The Control Panel consists of the following:
Fault indicators: These indicators light when a fault or jam
occurs in either a particular area of the SquareFold Trimmer
Module or in the finisher:
occurs in either a particular area of the SquareFold Trimmer
Module or in the finisher:
Control panel
This indicator lights when a jam occurs as the booklet is
leaving the exit area of the finisher.
leaving the exit area of the finisher.
This indicator lights when a jam occurs in the square
fold area.
fold area.
This indicator lights when a jam occurs in the trimmer
area.
area.
This indicator lights when the Trimmer Waste Container
is pulled out or when it is full.
is pulled out or when it is full.
Trimmer functions: This area of the control panel contains
the following:
the following:
2.
1.
1b.
1c.
1d.
Trimmer power indicator: This lights when the Trimmer
Mode is on.
Mode is on.
Trimmer on/off button: Press this button to switch
on/off the Trimmer Mode.
on/off the Trimmer Mode.
2a.
2b.
Tip: If one of these indicators (1a, 1b, 1c) is lit, the top
covers can be opened, and the jam/fault cleared; otherwise,
during normal operation or when the machine is idle, the top
covers cannot be opened. For information on jam/fault
clearance, refer to page 12.
covers can be opened, and the jam/fault cleared; otherwise,
during normal operation or when the machine is idle, the top
covers cannot be opened. For information on jam/fault
clearance, refer to page 12.
1a.