Marantz R3001 ユーザーズマニュアル

The SR3001 is equipped for future expansion through 
the use of Multi channel SACD multichannel player or 
DVD-Audio player.
When this is selected, the input signals connected to 
the L(front left), R (front right), CENTER, SL (surround 
left), SR (surround right) and SBL (surround back left) 
and SBR (surround back right) channels of the 7.1 
CH. In jacks are output directly to the front (left and 
right), center, surround (left and right) and surround 
back speaker systems as well as the pre-out jacks 
without passing through the surround circuitry.
In addition, the signal input to the SW (subwoofer) 
jack is output to the PRE OUT SW (subwoofer) jack.
When 7.1 CH. INPUT is selected, the last video input 
used remains routed to the Monitor Outputs.
This permits simultaneous viewing with video 
sources

3

2

1

6

5

4

9

8

0

7

ENTER

 

  Select a desired Video source to decide the 

routed video signal to the Monitor Outputs .

 

 Press 

the 

7.1 CH INPUT button on the front 

panel or press 7.1 CH IN on the remote to 
switch the 7.1 channel input.

Recording the video from one source and the 
audio from another
You can add the sound from one source to the 
video of another source to make your own video 
recordings.
Below is an example of recording the sound from 
a compact disc player connected to CD IN and the 
video from a video camera connected to VCR1 to 
video cassette recorder connected to the DSS/VCR2 
OUT jack.

 

  Switch the video output source to VCR1 by  

simply pressing the input selector buttons on 
the remote.

 

  Switch the audio input source to CD by simply 

pressing the input selector buttons on the 
remote.

 

  Now “CD” has been selected as the audio input 

source and “VCR1” as the video input source.

•  If you change the input source during recording, you 

will record the signals from the newly selected input 
source.

•  You cannot record the surround effects.

•  There is no conversion from digital to analog .

  When connecting CD players and other digital 

components, do not connect only the digital 
terminals, but the analog ones as well.

AAC

Press the HT-EQ button on the front panel to turn on 
the HT-EQ mode.
The tonal balance of a film soundtrack will be 
excessively bright and harsh when played back over 
audio equipment in the home. This is because fi lm 
soundtracks were designed to be played back in large 
movie theater environments.
Activating the HT-EQ feature when watching a fi lm 
made for movie theaters corrects this and restores 
the correct tonal balance.
The HT-EQ feature can be activated only while in 
Dolby Pro Logic Mode, or while decoding Dolby 
Digital or DTS encoded material.

In normal operation, the audio or video source 
selected for listening through the SR3001 is sent to 
the record outputs.
This means that any program you are watching 
or listening to may be recorded simply by placing 
machines connected to the outputs for TAPE OUT, 
CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in 
the record mode.

 

  Select the input source to record by turning the 

INPUT FUNCTION SELECTOR knob on the 
front panel or simply press the input selector 
buttons on the remote.

 

  The input source is now selected and you may 

watch or listen to it as desired.

 

  The currently selected input source signal 

is output to the TAPE OUT, CD-R/MD OUT, 
VCR1 OUT, and DSS/VCR2 OUT outputs for 
recording. 

 

  Start recording to the recording component as 

desired.