Marantz R3001 ユーザーズマニュアル

Frequency scan step for AM is selectable. 
Default setup is 9 kHz step, if your country’s standard 
is 10 kHz step, Press TUNER button on the remote 
more than 6 seconds. Scan step will change.

Preset memory for the tuner will clear by changing 
this setup.

AAC

0

 

  To select tuner and desired band (FM or AM), 

press the BAND button on the front panel.

 

 Press 

the 

3 or 4 cursor buttons on the front 

panel for more than 1 second to start the auto 
tuning function.

 

  Automatic searching begins then stops when a 

station is tuned in.

 

  To select tuner and desired band (FM or AM), 

press the TUNER  button twice within in two 
seconds on the remote.

 

 Press 

the 

5 or 6 for more than 1 second on 

the remote.

 

  Automatic searching begins then stops when a 

station is tuned in.

If tuning does not stop at the desired station, use to 
the “Manual tuning” operation.

AAC

0

 

  To select tuner and desired band (FM or AM), 

press the BAND button on the front panel 

 

 Press 

the 

3 or 4 cursor buttons on the front 

panel to select the desired station.

 

  To select tuner and desired band (FM or AM), 

press the TUNER  button twice within in two 
seconds on the remote.

 

 Press 

the 

5 or 6 on the remote to tune in the 

desired station.

3

2

1

6

5

4

9

8

0

7

 

  To select tuner and desired band (FM or AM), 

press the TUNER  button twice within two 
seconds on the remote.

 

 Press 

the 

F.DIRECT on the remote, display will 

show “FREQ - - - -”.

 

  Input your desired station’s frequency with the 

numeric buttons on the remote.

 

  The desired station will automatically be tuned.

AAC

When in the auto stereo mode, AUTO indicator will 
be illuminated on the display.
The “ST” indicator is illuminated when a stereo 
broadcast is tuned in. 
At open frequencies, the noise is muted and the 
“TUNED” and “ST” indicators are not illuminated.
If the signal is weak, it may be diffi cult to tune into the 
station in stereo. In such a case, press the T-MODE 
button on the front panel or remote.
“AUTO” indicator is not illuminated, if FM stereo 
broadcasts are received in monaural and the “ST” 
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE 
button or press T-MODE  button on the remote again. 
AUTO indicator is illuminated on the display.  

With this unit you can preset up to 50 FM/AM stations 
in any order.
For each station, you can memorize the frequency 
and reception mode if desired.

This function automatically scans the FM and AM 
band and enters all stations with proper signal 
strength into the memory.

AAC

 

  To select FM , press the BAND button on the 

front panel.

 

  While pressing the MEMO button, press the 

2 

cursor button.

 

  “AUTO PRESET” will appear on the display, 

and scanning starts from the lowest frequency.

 

  Each time the tuner fi nds a station, scanning 

will pause and the station will be played for fi ve 
seconds.

 

  During this time, the following operations are 

possible.

 

  The band can be changed by the BAND button.

 

  If no button is pressed during this period, the 

current station is memorized in location Preset 
02. 

 

  If you wish to skip the current station, press the 

3 cursor button during this period, this station is 
skipped and auto presetting continues.

 

  Operation stops automatically when all 50 

preset memory positions are fi lled or when auto 
scanning attains the highest end of all bands. 
If you desire to stop the auto preset memory at 
anytime, press the CLEAR button.

AAC

3

2

1

6

5

4

9

8

0

7

ENTER

 

  Tune into the radio station you desire (Refer to 

the “MANUAL TUNING” or “AUTO TUNING” 
section).

 

  Press the MEMO button on the front panel. “– –“ 

(preset number) starts blinking on the display.

 

  Select the preset number by pressing the 

3 

or 

4 cursor  buttons, while this is still blinking 

(approx. 5 seconds)

 

 Press 

the 

MEMO  button again to enter. The 

display stops blinking. 

 

  The station is now stored in the specifi ed preset 

memory location.