GE Simon Security System ユーザーズマニュアル
Simon Security System
10
Dialog QS 1500 Touchtalk Interactive Keypad
With the addition of the QS 1500 Keypad, the user is able to hear the voice feedback
that is heard at the control panel. This enables the user to hear voice feedback from
remote locations (where the keypad is mounted).
that is heard at the control panel. This enables the user to hear voice feedback from
remote locations (where the keypad is mounted).
Canceling and
Preventing
Accidental
Alarms
Preventing
Accidental
Alarms
One of the biggest concerns you might have regarding your security system, is causing
an accidental alarm. Most accidental alarms occur when leaving the residence after
arming the system, or, before disarming the system upon your return.
an accidental alarm. Most accidental alarms occur when leaving the residence after
arming the system, or, before disarming the system upon your return.
Canceling Accidental Alarms
There is a communicator delay (Dialer Delay) of 30 seconds programmed into this
panel. The panel will delay 30 seconds before dialing the central monitoring station,
numeric pager or remote phone to send reports. You can have your installer program
this delay time between 0 - 254 seconds.
panel. The panel will delay 30 seconds before dialing the central monitoring station,
numeric pager or remote phone to send reports. You can have your installer program
this delay time between 0 - 254 seconds.
You have ___ seconds to cancel an accidental alarm.
To cancel an accidental alarm before the programmed dialer delay time expires, enter
your access code.
your access code.
Guidelines for Preventing Accidental Alarms
The following guidelines will go a long way toward preventing accidental alarms.
•
Close doors and windows before you leave your house.
•
Gather your belongings, so you can exit immediately after arming the system.
•
Always enter and exit within the programmed delay times.
•
Make sure you leave through a door that has a delay time set for it.
•
Disarm your system immediately upon returning home.
•
Be aware of the devices in your security system and learn how each one operates.
•
If you have pets, ask your installer if you need pet lenses in your motion detectors.
•
Check the location of your smoke detectors. Smoke detectors near bathrooms and
kitchens can be tripped by steam and smoke from cooking.
kitchens can be tripped by steam and smoke from cooking.
•
Take note of system beeps, voice announcements and indicator lights which indi-
cate the current system status.
cate the current system status.
AC Power Restore
-102 -102
Fail to Close
-113 -113
AC Power Failure
-103 -103
Bypass
-114 -114
Latchkey
-104 -104
Restoral
-115 -115
No Activity
-105 -105
Supervisory
-116 -116
Panic
-106 -106
Trouble
-117 -117
Emergency
-107 -107
Tamper
-118 -118
Intrusion
-108 -108
Gas
-119 -119
Fire
-109 -109
Freeze
-120 -120
Disarming
-110 -110
Environmental
-121 -121
Arming
-111 -111
Programming/Sensor Test
-122 -122
Numeric Pager Reporting