Crimestopper Security Products RS801 ユーザーズマニュアル
CONVENIENCE AND SAFETY FEATURES
HOOD OPEN SAFETY SWITCH
Prevents the engine being Remote Started when hood is open and will abort a remote start if running. Eliminates
risk of injury to someone working under the hood of the vehicle. If a Remote Start is requested with the hood open,
the lights will flash twice, Ignition will not turn on, and the unit will not attempt a start.
Prevents the engine being Remote Started when hood is open and will abort a remote start if running. Eliminates
risk of injury to someone working under the hood of the vehicle. If a Remote Start is requested with the hood open,
the lights will flash twice, Ignition will not turn on, and the unit will not attempt a start.
BRAKE PEDAL RESET CIRCUITRY
Prevents starting or shuts off a remote started vehicle when this circuit is active or activated. Prevents unauthorized
tampering. This circuit shuts the system down immediately when brake pedal is pressed if key is not in ignition and
turned to the RUN position.
Prevents starting or shuts off a remote started vehicle when this circuit is active or activated. Prevents unauthorized
tampering. This circuit shuts the system down immediately when brake pedal is pressed if key is not in ignition and
turned to the RUN position.
ANTI-GRIND / STARTER DISABLE
Prevents the driver from accidentally grinding the starter if the Ignition key is turned too far (to the start position)
while engine is already running from the remote starter. Starter circuit is automatically disabled when doors are
locked using remote (RS800 model only) as an added security feature.
Prevents the driver from accidentally grinding the starter if the Ignition key is turned too far (to the start position)
while engine is already running from the remote starter. Starter circuit is automatically disabled when doors are
locked using remote (RS800 model only) as an added security feature.
NOTE:
In the event of a major malfunction, performing electrical service or jumpstarting the vehicle you should remove the
main Power Fuse(s) to protect the unit from possible damage.
In the event of a major malfunction, performing electrical service or jumpstarting the vehicle you should remove the
main Power Fuse(s) to protect the unit from possible damage.
TRANSMITTER PROGRAMMING (RS800ER ONLY)
TRANSMITTER PROGRAMMING:
Note: All transmitter codes must be learned at time of programming!! The RS800 allows storage of up to 4
different transmitter codes.
1. Open Hood.
2. Turn key to the ON position.
3. Press Programming button 4 times. After a few seconds, the unit will flash the parking lights 4 times.
4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a
different transmitter codes.
1. Open Hood.
2. Turn key to the ON position.
3. Press Programming button 4 times. After a few seconds, the unit will flash the parking lights 4 times.
4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a
2
nd
code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3
rd
code and 4 flashes for the 4
th
code. If all 4 codes are learned, the unit will automatically exit code learning mode,
otherwise turn key off and close hood.
CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063
RS800 OPS REVA 08.01.00
RS800 OPS REVA 08.01.00