Nikon N1406 ユーザーズマニュアル
122
4
Select direct measurement mode.
Release the
Release the
L (U) button briefly
and then press the button until
D
starts to flash in the control panel
and viewfinder.
and viewfinder.
5
Measure white balance.
In the few seconds before the
indicators stop flashing, frame the
reference object so that it fills the
viewfinder and press the shutter-release button all the way
down. The camera will measure a value for white balance and
store it in the preset selected in Step 3. No photograph will
be recorded; white balance can be measured accurately even
when the camera is not in focus.
In the few seconds before the
indicators stop flashing, frame the
reference object so that it fills the
viewfinder and press the shutter-release button all the way
down. The camera will measure a value for white balance and
store it in the preset selected in Step 3. No photograph will
be recorded; white balance can be measured accurately even
when the camera is not in focus.
A
Protected Presets
If the current preset is protected (
0 129), 3 or Prt will flash in the
control panel, viewfinder, and information display if you attempt to
measure a new value.
measure a new value.
Control panel
Viewfinder