Nikon N1406 ユーザーズマニュアル

123

Check the results.
If the camera was able to measure a 
value for white balance, 

C will 

flash in the control panel, while the 
viewfinder will show a flashing 

a. 

Press the shutter-release button 
halfway to exit to shooting mode.

If lighting is too dark or too bright, 
the camera may be unable to 
measure white balance. A flashing 
b a will appear in the control 
panel and viewfinder. Press the 
shutter-release button halfway to 
return to Step 5 and measure white 
balance again.

D

If no operations are performed during viewfinder photography while 
the displays are flashing, direct measurement mode will end in the 
time selected for Custom Setting c2 (Standby timer, 

A

Selecting Preset manual for the White 
balance option in either of the shooting 
menus displays the dialog shown at right; 
highlight a preset and press 

J. If no value 

currently exists for the selected preset, white 
balance will be set to 5200 K, the same as 
Direct sunlight.