Chauvet LED-FS1 ユーザーズマニュアル
Page 4 of 10
COLORstrip™ Footswitch User Manual Rev. 3
Product at a
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Fixed voltage (120 V or 230 V)
Switchable voltage (120 V/230 V)
Auto-ranging Power Supply
Switchable voltage (120 V/230 V)
Auto-ranging Power Supply
x
Sound-Activated
x
Replaceable Fuse
Circuit breaker
Circuit breaker
x
DMX
x
User-Serviceable
x
Master/Slave
x
Duty Cycle
x
Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
Notes include important safety information about installation, usage, and maintenance.
·
Always connect the product to a grounded circuit to avoid the risk of electrocution.
·
Always disconnect the product from the power source before cleaning.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect the product from power cord by pulling or tugging on the cord.
·
Make sure there are no flammable materials close to the product when operating.
·
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
product is within the range stated on the decal or rear panel of the product.
·
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
expose the product to rain or moisture.
·
Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
cm) from adjacent surfaces.
·
Never connect the product to a dimmer.
·
Never carry the product from the power cord or any moving part. The maximum
ambient temperature (Ta) is 104° F (40° C). Do not operate the product at higher
temperatures.
ambient temperature (Ta) is 104° F (40° C). Do not operate the product at higher
temperatures.
·
In the event of a serious operating problem, stop using the product immediately.
·
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
damage or malfunction. Please contact the nearest authorized technical assistance
center.
·
Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.
user, be sure that they also receive this document.