Tascam CC-222MKIV ユーザーズマニュアル

1 – Introduction

TASCAM CC-222

4 – Disc operations

Playback modes

The unit can be set to play back a single track, the whole

disc in the created order, the tracks of the disc in a random

(shuffled) order, or a programmed order. This operation

takes place when stopped.

NOTE

Selecting the playback mode is only possible using the
remote control unit.

1 When stopped, press the

PLAY MODE

key on the

remote control repeatedly to cycle the display

through the following:

•

Continue.

Normal playback mode. Playback contin-

ues in the normal order.

•

Single.

The currently selected track is played and

then playback stops. The

SINGLE

indicator lights in this

mode.

•

Random.

In this mode, all the tracks on the disc are

played in random order, and the

RANDOM

indicator lights

(see “Random playback” on page 17 below).

•

Program.

The

PROGRAM

indicator lights in this mode

(see “Program playback” on page 17 below).

The selected mode is shown in large characters dis-appears

from the display a few seconds after selecting the mode,

and the display returns to its previous mode.

Program playback

The steps to set up to 99 program steps (tracks) to be

played back in a specified order are as follows:

1 When stopped, press the

PLAY MODE

key until the

display shows

Program

2 The display changes to show

0Tr 00:00 00

meaning that there are no tracks assigned for pro-

gram playback.

3 Use the number keys on the remote control to enter

a track number. There is no need to press the

EN-

TER

key.

The track entered is assigned to the program step,

and the display changes, showing the track number,

the total time of the program so far, and the step

number, e.g.

2Tr 14:56 03

4 The next program step can then be entered.

NOTE

Steps 3 and 4 above can also be carried out from the
main unit by turning and pushing the MULTI DIAL key.

5 Repeat steps 3 and 4 above until the program is

complete.

6 Press the

PLAY

key to start playback at the first

program step.

The display shows the track, the current time dis-

play, and the program step number.

While in program playback mode, using the

SKIP

keys or the

MULTI DIAL

moves backwards and for-

wards in the order set in the program.

Use the

PAUSE

key to stop playback temporarily or the

STOP

key to stop playback of the program. If the

STOP

key is used, when playback is restarted, it starts from the

first program step.
When stopped, if the

CLEAR

key on the remote control is

pressed, it cancels the last track entered in the program.
Clear the program by pressing the

PLAY MODE

until the

display shows

Continue

. The program is also cleared

when the disc tray is opened, and if the

STOP

key is

pressed when playback is stopped in programmed order

mode.
The programmed play order is not memorized when the

power is turned off.
If you enter more than 99 program steps, the message

PGM

Full !

appears on the display.

If the total time programmed goes over 100 minutes, the

message

--:--

appears on the display.

In this mode, the unit will playback all the tracks on the

disc in random order.
1 When stopped, press the

PLAY MODE

key until the

display shows

Random

2 Press the

PLAY

key to start random playback.

While playing back, using the track skip function

will move forwards through the random order. Turn

the

MULTI DIAL

on the unit clockwise or press the

SKIP

(

) key on the remote control.

NOTE

You cannot go backwards to previous tracks in the
Random playback mode.

To stop random playback, press the

STOP

key. Opening

the disc tray also stops random playback.

Random playback