3D Connexion ZT1000 ユーザーズマニュアル
zt1100/xz200 and xt1500 Series
Removing and Replacing Parts
45
Troubleshooting and Self-Repair Guide
Figure 12. Removing the Mini-PCI Card
Reassembly Notes
• Reattach the cable(s) to the card, and tuck them into the compartment.
• Gently press the card into the connector at an angle of about 30°, until it is fully inserted. Then
• Gently press the card into the connector at an angle of about 30°, until it is fully inserted. Then
press down on both sides of the card until the latches snap closed.