NuTone NC300 series オーナーマニュアル

door station
The  Door  Station  is  an  exterior  intercom  speaker  and  door

chime  pushbutton  installed  at  home  entrances.  The  NM100

system supports up to 3 door stations. The door station allows

for communications from within the house to visitors. Any station

with its Intercom Selector Switches set to Intercom or Radio/INT

can communicate with the Door Station.

clock settings
You can set two clock functions:
•  Normal—Displays the normal time of day.
•  Music Auto On/Off—Sets the times to automatically turn the

last music source on and then off.

To change clock settings:
1.  Press TIME. The hour field for Normal Time blinks, and SET

TIME appears on the display.

2.  Press VOLUME UP or VOLUME DOWN to change the hour.

An A or P indicates AM or PM, respectively.

3.  Press  TIME.  The  minute  field  blinks.  Use  the  VOLUME

buttons to change the minutes.

4.  Press TIME to continue through the settings: Music Auto On,

hour and minutes and Music Auto Off, hour and minutes.

5.  After you have entered Music Auto Off minutes, press TIME

to return to Normal Time display.

 Note:  You  can  enable  or  disable  the  AUTO  function.    The

word “Auto” will appear on the display when Auto Function is

on. See Music Settings/Auto On/Off.

You can select from four music sources:
•  AUX—Any audio source you connect, such as an external

CD player or a stereo system.

•  AM radio
•  FM radio
•  CD player (NC300WH CD Player). This source can also be

used to hook up an external audio device if the system does

not include an NC300 CD player. For CD functionality, see

Master Station Operation/CD Player Operation.

To select a music source:
1.  Press POWER to turn on music.
2.  Press SOURCE repeatedly to cycle through AUX, AM, FM,

and CD until you reach the music source you prefer.

You  can  set  the  system  to  turn  music  on  automatically  at  a

predetermined time and to turn the music off automatically at a

predetermined time.
1.  Set  the  Auto  On/Off  times  as  described  under  Clock

Settings.

2.  Press the AUTO button to toggle between On and Off. When

the Auto function is on, AUTO appears on the display.

radio settings
You can tune in FM or AM radio stations, and can set up to 8

presets on each band.

To tune a radio station:
1.  Press POWER to turn on the music.
2.  Select  FM  or  AM.  See  Music  Settings/Music  Source  for

instructions.

3.  Use TUNE UP or TUNE DOWN to find a station. If you press

and release, within 1 second, TUNE UP or TUNE DOWN,

the  tuner  goes  into  Seek  Mode  and  finds  the  next  station

with  a  strong  signal.  If  you  press  and  hold  TUNE  UP  or

TUNE DOWN, the tuner goes into Scan Mode and scans all

frequencies until you release the button.