Hitachi DZ-BD10HA ユーザーズマニュアル

*1
• This message may also appear if the disc is dirty. If this message appears when a recorded disc is 

recognized immediately after it is inserted, do not repair the disc; remove it and then use a dry soft 
cloth to clean off the dirt before using it.

• This message may also appear when condensation occurs. In this case, do not repair the disc; turn 

the camcorder off, wait until it dries out, and then turn it on again.

• If the repair message appears when you turn the camcorder on from off with a disc loaded after 

recording on it, choose repair.

• If the repair message appears when recording and playback are normally possible with another disc 

– and no condensation has occurred, and the disc is not dirty – choose repair.

*2
• This message may also appear if the disc is dirty. In this case, do not format the disc. Remove it and 

then use a dry soft cloth to clean off the dirt before using it.

• This message may also appear when condensation occurs. In this case, do not format the disc; turn 

the camcorder off, wait until it dries out, and then turn it on again.

• Formatting will delete all data on the disc.

There was no scene 
which can be 
deleted.

This message will appear if you try to delete multiple 
scenes when all the selected scenes have been locked. 
Release the lock on scenes before deleting.

66, 69

This disc cannot be 
used. Please replace 
disc.

A disc that cannot be used on this camcorder has been 
loaded. Check the type of disc.

21

This disc is recorded 
by the PAL system. 
Please replace disc.

This camcorder can use only discs recorded in the NTSC 
system. A disc recorded in the PAL system cannot be 
used.

—

Unformat HDD/
Disc/SD Card.

• The HDD/Disc/Card may not be formatted or it may be 

damaged. Use another disc.

• See *2 on p. 95.

—

Use AC adapter/
charger.

No dubbing, HDD deletion, or disc finalization is 
possible with a battery pack.

25, 56, 77, 

109

Use AC adapter/
charger.
Turn off power.

Scenes cannot be repaired when the camcorder is
powered by a battery pack.
If the AC adapter/charger is unavailable in handy place, 
remove the disc and use another disc. Repair the disc 
later.

25

Video data being 
analyzed…

The battery pack or AC adapter/charger may have been 
detached while the power is turned on. Be sure to turn the 
power off before detaching the battery pack or AC 
adapter/charger.

—

Write protected.
Check SD Card.

A card with the erase prevention switch locked is 
inserted. Unlock the switch.

22

Write protected.
Check Disc.

The disc is write-protected. Use the disc navigation menu 
to release the protection.

72