Hitachi DZ-BD10HA ユーザーズマニュアル

ページ / 121
97
Ad
di
ti
on
al I
n
fo
rm
a
tio
n
If you have any trouble with your camcorder, first use this troubleshooting guide to try to 
solve the problem. If the problem persists, consult your dealer. Do not attempt to make 
any physical repairs yourself.
Power supplies
Troubleshooting
Symptom
Cause and Correction
Reference 
page
Battery cannot be 
charged.
Is the DC power cord connected to the AC adapter/
charger? Unplug it.
18
Is the battery abnormally hot?
Remove the battery, leave it for a while to cool down, then 
charge it.
Is the ambient temperature too low or too high?
Charge the battery at 50 – 86ºF (10 – 30ºC).
Has the battery been unused for a long time?
Remove the battery, and then reattach it.
If the battery does not charge after trying all of the above, 
it may be dead. Purchase a new battery.
26
Battery weakens fast. Are you using the camcorder where the temperature is 
low?
A fully charged battery (DZ-BP14S/DZ-BP14SW/DZ-
BP21SW) may be discharged sooner than usual at low 
temperatures. Keep extra batteries on hand.
25
Battery may be dead.
The performance of the battery will deteriorate if it is 
used for an extended period of time or frequently.
Purchase a new battery.
26
The CHARGE 
indicator on AC 
adapter/charger is 
blinking.
Is the ambient temperature too low or too high?
Charge the battery at 50 – 86ºF (10 – 30ºC).
If the battery is completely drained (for example, if it has 
not been used for over a year), it may take longer to begin 
charging. Continue charging: after awhile, the battery 
may recover enough voltage to begin charging normally 
and the CHARGE indicator will light.
25
Power turns off 
immediately after being 
turned on.
Is the battery charged?
Charge it.
18
When power is 
turned on, the LCD 
screen will turn on 
and off.
Power goes off 
unexpectedly.
Is Power Save set to “On”?
42