TiVo series 2 ユーザーズマニュアル

S e t u p   5 :   B o t h   a   C a b l e   B o x   a n d   a   S a t e l l i t e   R e c e i v e r

1. Make sure the cables from the wall are connected to your cable and satellite boxes. 

2. Connect a Composite A/V cable from the Audio/Video Output connectors on the 

satellite box to the Audio/Video Input 1 connectors on the Recorder.

3. Connect an RF Coaxial cable from the RF Out connector on the cable box to the RF IN 

connector on the Recorder.

4. Connect Composite A/V cables from the Audio/Video Output 1 connectors on the 

Recorder to the Audio/Video Input connectors on the TV. 

5. Connect a phone line (page 8).

6. Connect the Serial Control cable. If your DIRECTV satellite receiver 

has a 9-pin Data connector, plug one end of the Serial Control cable
into the Data connector, and other end into the Channel Change/Serial 
connector on the Recorder. Then skip to step 8. 
If you don’t have a Data connector, see page 9 for Serial control alternatives. If you 
still can’t use a Serial connection or if you don’t have DIRECTV service, go to step 7.

7. Connect the IR Control cable. (a) Plug the purple end of the IR Control cable into the 

 connector (the upper mini-jack) on the Recorder. (b) Locate your 

satellite and cable box’s IR sensors (see page 9). (c) Mount the IR emitters. Place one 
emitter on top of the cable box. If you connected the Serial Control cable in step 6, 
mount the other IR emitter underneath the cable box. If you didn’t connect the Serial 
Control cable in step 6, mount the other IR emitter on top of the satellite box. Be sure 
both emitters stick out about 1.5 inches directly in front of the IR sensors. (Use the 
provided adhesive strips to hold the emitters in place.)

8. Plug in all power cords and turn on your TV. If you don’t see the Welcome screen, you 

need to find the correct TV input setting. Press the Input, Source, or TV/Video button 
on your TV until you see the Welcome screen. For more help, see page 42.

9. Once you see the Welcome screen, the last step is to complete Guided Setup (see the 

User’s Guide for details). You must complete Guided Setup before you can play and 
record DVDs.

®

®