TiVo series 2 ユーザーズマニュアル

S e t u p   6 :   C a b l e   o r   S a t e l l i t e   B o x ,   A / V   R e c e i v e r ,   a n d   G a m e

1. Cable or Satellite Box to Recorder 

Make sure the cable from the wall is connected to your cable or satellite box. Connect 
a Composite Video and Left/Right Audio cable from the Audio/Video Out connectors 
on the cable or satellite box to the Audio/Video Input 1 connectors on the Recorder. 
(If you have cable, but don’t have a cable or satellite box, connect the RF Coaxial 
cable currently coming from the wall to the connector labeled RF IN on the Recorder.)

2. Recorder to A/V Receiver 

Connect Composite A/V cables from the Audio/Video Output 1 connectors on the 
Recorder to the Audio/Video Input connectors on the A/V receiver. If the A/V 
Receiver has a Digital Audio Input, you can connect a digital audio cable (not 
supplied) from the Recorder’s Digital Audio Out to the A/V receiver.

3. A/V Receiver to TV

Connect Composite A/V cables from the Audio/Video Output connectors on the A/V 
receiver to the Audio/Video Input connectors on the TV.

4. Game Console to A/V Receiver 

Connect Composite A/V cables from the Audio/Video Output connectors on the 
Game Console to the Audio/Video Input connectors on the A/V receiver.

5. Connect a phone line (see page 8).

6. Connect the Serial Control cable. If your DIRECTV satellite receiver 

has a 9-pin Data connector, plug one end of the Serial Control cable
into the Data connector, and other end into the Channel Change/Serial
connector on the Recorder. Then skip to step 8.
If you don’t have a Data connector, see page 9 for Serial control alternatives. If you 
still can’t use a Serial connection or if you don’t have DIRECTV service, go to step 7.