Samsung DVD-VR355 ユーザーズマニュアル

ページ / 182
G
etting Started
English - 9
Before Reading the User’s Manual
Make sure to check the following terms before reading
the user’s manual.
Icons that will be used in manual
Icon
Term
Defi nition
DVD
This involves a function available 
with DVD or DVD-R/DVD-RW(V)/+R 
discs that have been recorded and 
fi nalized.
RAM
This involves a function available 
with DVD-RAM discs.
-RW
This involves a function available 
with DVD-RW discs.
-R
This involves a function available 
with DVD-R discs.
+RW
This involves a function available 
with DVD+RW discs.
+R
This involves a function available 
with DVD+R discs.
CD
This involves a function available 
with a data CD (CD-R or CD-RW).
JPEG
This involves a JPEG function 
available with CD-R/-RW or
DVD±R/±RW/-RAM discs.
MP3
This involves an MP3 function 
available with CD-R/-RW or 
DVD±R/±RW/-RAM discs.
MPEG4
This involves an MPEG4 function 
available with DVD±R/±RW/-RAM 
discs.
Caution
This involves a case where a 
function does not operate or 
settings may be cancelled.
NOTE
This involves tips or instructions on 
the page that help each function 
operate.
One-Touch 
button
A function that can be operated by 
using only one button.
ANYKEY 
button
A function that can be operated by 
using ANYKEY button.
About the use of this user’s manual
1)  Be sure to be familiarize yourself with the Safety 
Instructions before using this product. (See pages 2~5)
2)  If a problem occurs, check the Troubleshooting section.
(See pages 83~85)
Copyright
©2007 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s manual 
may be reproduced or copied without the prior written 
permission of Samsung Electronics Co.
How to use the DVD Recorder & VCR
Step 1 : Select the disc type
This unit can record on the following types of discs. 
If you want to repeatedly record on the same disc or you 
want to edit the disc after recording, select a rewritable 
DVD±RW or DVD-RAM type disc. If you want to save a 
recording without making any changes, choose a non-
rewritable DVD±R.
Step 2 : Format the disc to start recording
Unlike a VCR, the recorder automatically starts formatting 
when an unused disc is inserted. This is required for the 
preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video 
Recording format (VR mode). You can edit recorded 
images and create a playlist in a specifi c sequence 
according to your requirements.
Using a DVD±RW/+R
•  When an unused DVD±RW/+R disc is fi rst inserted, the 
message "Uninitialized Disc. Do you want to initialize this 
disc?" will be displayed.
If you select Yes, initializing will be begin. DVD-RW discs 
can be formatted in either DVD-Video format (Video 
mode) or DVD-Video Recording format (VR mode)
•  There are no differences between DVD-Video format 
(Video mode) and DVD-Video Recording format (VR 
mode) with DVD+R discs.
Using a DVD-R
When using a DVD-R disc, only V mode recording is 
possible and no initialization is needed to play it on this 
recorder. However, fi nalization is necessary to play this 
disc on other DVD players.
 You can only use either the VR or Video mode on 
a DVD-RW, but not both at the same time.
 You can format a DVD-RW to V or VR mode using 
disc manager.
It should be noted that the disc's data will be lost 
when changing formats.
Step 3 : Recording
There are two different recording methods: Direct 
Recording and Timer Recording. Timer recording is 
determined as a date and recording can be done once, 
daily or weekly. There are 4 recording modes : XP (high 
quality mode), SP (standard quality mode), LP (long 
recording mode), and EP (extended mode).
01343A-VR355-XAC-ENG.indb   9
01343A-VR355-XAC-ENG.indb   9
2007-03-23   오후 6:49:05
2007-03-23   오후 6:49:05