Precor 5.37 ユーザーズマニュアル

HOUR METER scrolls across on the display.

4. Press OK to view the number of hours that the unit has 

been in use or press the 

▼ arrow key to move to the next 

informational display. 

The EFX tracks the elapsed minutes, but the value that 
appears is truncated to the nearest full hour.

5. When you are ready, press OK to move to the next 

display (software version).

U-BOOT SW scrolls across the display. 

6. Press OK to view the upper board boot software part 

number (for example, 48996-100) or press the 

▼ arrow 

key to move to the next informational display.

7. When you are ready, press OK to move to the next 

display (upper base application software part number).

U-BASE SW scrolls across the display. 

8. Press OK to view the upper base application software 

part number or press the 

▼ arrow key to move to the next 

informational display. 

9. When you are ready, press OK to move to the next 

display (lower board’s software version number).

LOWER SW scrolls across the display. 

10.Press OK to view the lower board software version and 

part number.

11.When you are ready, press OK to move to the next 

display (metrics board’s software part number).

METRICS BOARD SW PART NUMBER scrolls across 
the display. 

12.Write the numbers below. You will need these numbers 

if you call Customer Support with questions. This 
information will help rule out any software-related 
problems:

UPPER BOOT SW: ___________________

UPPER BASE SW: ___________________

LOWER SW: ___________________

METRICS BOARD SW: ___________________

13.When you are ready, press OK to move to the next 

display (usage log).

537_Owners Manual.book  Page 62  Monday, August 6, 2007  9:08 AM