Vision Fitness X6100 ユーザーズマニュアル
6
2
STEP
Pedal Arm
Bracket Cover
Rotation
Axle
Guide Rail
Pedal Arm
2
STEP
• Slide a wavy washer (25x34x2T)
onto the right rotation axle. Slide the
bushing housing of the right pedal
arm onto the right rotation axle. The
pedal arm roller wheel should be
placed in the groove of the guide rail.
Secure the pedal arm to the rotation
axle with a washer (8x30x1.5T) and
screw (M8x20L). Tighten with a 5mm
T-shaped wrench.
onto the right rotation axle. Slide the
bushing housing of the right pedal
arm onto the right rotation axle. The
pedal arm roller wheel should be
placed in the groove of the guide rail.
Secure the pedal arm to the rotation
axle with a washer (8x30x1.5T) and
screw (M8x20L). Tighten with a 5mm
T-shaped wrench.
• Place the pedal arm bracket cover
over the bushing housing of the pedal
arm. Secure in place with a washer
(5x10x1T) and screw (M5x10L).
Tighten with the screwdriver.
over the bushing housing of the pedal
arm. Secure in place with a washer
(5x10x1T) and screw (M5x10L).
Tighten with the screwdriver.
• Repeat both steps on the left side.
BLUE BAG