Polycom 3725-22370-001/B ユーザーズマニュアル

If you have a QSX connected to a VTX1000 conference phone, you can use the phones 
controls as shown below: 
 

 

 
 
Note:  If your QSX system is connected to both a content controller and a SoundStation 
VTX 1000 phone, you can use either device to control meeting content and access the 
Info screen.

 

 
Note: Unless you have configured the QSX for a specific password, a new password will 
be generated each time the VTX 1000 phone is placed on-hook (i.e.- hung up). 

You can manually dial the IP address of a remote QSX or Polycom MGC bridge using 
the keypad on your VTX 1000.   
 
Note: In this scenario, the VTX 1000 is serving as a dial pad for one QSX dialing another 
one. 
 
In order to do so, follow these steps: 
 

1. Make a voice call by dialing the phone number using the VTX 1000 dial pad. 
 
2. To dial a device with an IP Address and Password, dial the following sequence: 

 

Dial sequence:  

#*<IP>#[password]# 

Example:   #*172*43*16*213#1234# 

 

 

12