Polycom 3725-22370-001/B ユーザーズマニュアル

3. To dial a device with an extension and password when both are registered to the 
same gatekeeper, dial the following sequence: 
 

Dial sequence:  

#*<Extension>#[password]# 

Example:   #*2483#1234# 
 

4. To dial a device with a Gatekeeper IP Address, an Extension and a Password, dial 
the following sequence: 

 

Dial sequence:  

#*<IP>**<Extension>#[password]# 

Example:   #*172*43*16*213**2483#1234# 

 

Note:  If you misdial a sequence, you can press #* to reset the dialing sequence and 
start over at any time. 
 
Note: If no password is required, you can end the dialing sequence by pressing ## 
(e.g.- #*172*43*16*213##). 

The Info screen displays status information for the meeting and your QSX system, as 
shown below: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This information includes the following: 
 

•  Meeting Web Address. The address of the Master Control Unit (MCU) 

•  Internal IP Address. This is the IP address of the QSX system.  It will be the same 

as the Meeting Web Address if this QSX is the MCU. 

•  External IP Address. The External IP Address, if configured, is the address that 

allows access to meeting content from outside the LAN. For information about 
configuring an external IP address, refer to 

page 36 and/or 58

. 

•  Meeting Password. Six digit password that Web participants will use to log into 

QSX meeting.  For more information about passwords and password security, 
refer to Page 30. 

 

13