Patton electronic SmartNode 4110 Series ユーザーズマニュアル

RADIUS configuration

SmartWare Software Configuration Guide 

Transactions between the RADIUS client and server are authenticated through the use of a shared secret, which is 
never sent over the network—the same secret must thus be known to the server and the client by configuration. 
Using this secret as an encryption key, user passwords are sent encrypted between the client and RADIUS server.

If the AAA profiles you have defined make use of the RADIUS AAA method, you must configure the corre-
sponding RADIUS clients. To configure RADIUS clients, do the following steps:

Mode: Configure

Example: Configure the RADIUS clients as shown in 

node>enable
node#configure
node(cfg)#radius-client radius_deepblue
node(radius)[radius_~]#radius-server deepblue
node(radius)[radius_~]#shared-secret authentication 78f8a23b
node(radius)[radius_~]#exit
node(cfg)#radius-client radius_extern
node(radius)[radius_~]#radius-server 219.144.12.1
node(radius)[radius_~]#shared-secret authentication dd9351e13cc335
node(radius)[radius_~]#exit
node(cfg)#
node(cfg)#show radius-client
RADIUS clients:
  radius_deepblue
  radius_extern
node(cfg)#show radius-client radius_deepblue
AAA RADIUS Module: radius_deepblue
  Authentication Shared Secret: 78f8a23b
  Timeout: 6
  Sessions:
  UDP Interface:
    Configured Server Hostname: deepblue
node(cfg)#show radius-client radius_extern
AAA radius Module: radius_extern
  Authentication Shared Secret: dd9351e13cc335
  Timeout: 6
  Sessions:
  UDP Interface:
    Configured Server Hostname: 219.144.12.1

Adds a RADIUS client with name name and 
enters RADIUS-client configuration mode

Sets the hostname (or IP address) of the remote 
RADIUS server

Sets the password shared between the RADIUS 
client and the remote RADIUS server.

Goes back to the parent configuration mode

Displays configured RADIUS servers