Patton electronic SmartNode 4110 Series ユーザーズマニュアル

RADIUS configuration

SmartWare Software Configuration Guide 

node(cfg)#

The RADIUS accounting functionality can be added to a call-router configuration by inserting an AAA call-
control service between two call-router elements. Any call that is then routed through the AAA service will 
cause call detail records (CDRs) to be sent to the radius server. Normally an accounting start record is sent 
when the call is connected and the accounting stop record is sent, when the call is disconnected. If enabled, the 
AAA service is also able to send interim update records, after a specified interval. The AAA service can include 
the following standard RADIUS attributes in the CDRs:

ATTRIBUTE Acct-Status-Type

ATTRIBUTE Acct-Session-Time

ATTRIBUTE Acct-Session-Id

ATTRIBUTE NAS-Identifier

ATTRIBUTE Called-Station-Id

ATTRIBUTE Calling-Station-Id 

Additionally, the following vendor specific attributes are available to support voice service specific information: 

#

# dictionary.patton

#

VENDOR

Patton

1768 

#

#

Name

Id

Type

Vendor Note

# 

ATTRIBUTE Setup-Time 32 string Patton a) 

ATTRIBUTE Connect-Time 33 string Patton a) 

ATTRIBUTE Disconnect-Time 34 string Patton a) 

ATTRIBUTE Disconnect-Cause 35 integer Patton b) 

ATTRIBUTE Disconnect-Source 36 string Patton c) 

ATTRIBUTE Called-Unique-Id 48 string Patton d) 

ATTRIBUTE Called-IP-Address 49 ipaddr Patton 

ATTRIBUTE Called-Numbering-Plan 50 string Patton e) 

ATTRIBUTE Called-Type-Of-Number 51 string Patton f) 

ATTRIBUTE Calling-Unique-Id 80 string Patton d) 

ATTRIBUTE Calling-IP-Address 81 ipaddr Patton 

ATTRIBUTE Calling-Numbering-Plan 82 string Patton e) 

ATTRIBUTE Calling-Type-Of-Number 83 string Patton f) 

ATTRIBUTE Calling-Presentation-Indicator 88 string Patton g) 

ATTRIBUTE Calling-Screening-Indicator 89 string Patton h) 

a) Format of timestamps is "WWW MMM DD HH:MM:SS YYYY" Example: "Wed Jun 15 09:20:55 2005" 

b) ITU-T Q.931 cause value (1-127) 

c) { originator | terminator | internal } 

d) Contains the Call-Id for SIP or H.323 

e) { e.164 | data | telex | national | private } 

f) { international | national | network specific | subscriber | abbreviated } 

g) { allowed | restricted | unavailable } 

h) { user-provided, not screened | user-provided, verified and passed | user-provided, verified and failed | network provided }

The subset of information elements that is actually included in a CDR is 
dependant on the type of call and the information already available at the 
time the CDR is sent.