Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Link scheduler configuration task list

SmartWare Software Configuration Guide 

Mode: profile service-policy/profile

The following procedure guides through the steps required for creating, configuring and using service policy 
profiles on a WAN link that has an upstream and downstream capacity of 256kBit/s and is based on ADSL 
technology. The access device must be able to process the RTP traffic generated by a VoIP Phone located in the 
LAN like the local generated RTP stream. 

Mode: Configure

[name] (pf-srvp)[<name>]# [no] map packet-size 
{routed-voice | routed-voice-encrypted | [<lower-size> 
<upper-size>] } traffic-class <traffic-class-name>

Assigns IP packets of a predefined or speci-
fied range to a traffic-class. To name a spe-
cific size, configure lower-range and upper-
range with the same value.

[name] (cfg)# profile service-policy <name-
out>

Creates a new service policy profile will be con-
figured for the uplink.

[name] (pf-srvp)[<name-out>]# rate-limit 256 
atm-modem

Configures the uplink capacity.

[name] (pf-srvp)[<name-out>]# map packet-
size routed-voice traffic-class local-voice

Specifies that routed voice traffic will be pro-
cessed like local generated voice traffic.

[name] (pf-srvp)[<name-out>]# source traffic-
class local-voice

Enters traffic-class configuration mode

[name] (src)[local-v~]# priority

Specifies that local-voice has priority. Because 
route-voice is mapped to local-voice, also routed-
voice has priority.

[name] (src)[local-v~]# profile service-policy 
<name-in>

Creates a new service policy profile will be con-
figured for the downlink.

[name] (pf-srvp)[<name-in>]# rate-limit 256 
atm-modem voice-margin 80

Configures the downlink capacity and sets a 
voice-margin of 80kBit/s

[name] (pf-srvp)[<name-in>]# map packet-
size routed-voice traffic-class local-voice

Specifies that routed voice traffic will be pro-
cessed like local generated voice traffic.

[name] (pf-srvp)[<name-in>]# source traffic-
class local-voice

Enters traffic-class configuration mode

10 [name] (src)[local-v~]# priority

Specifies that local-voice has priority. Because 
route-voice is mapped to local-voice, also routed-
voice has priority.

11 [name] (src)[local-v~]# context ip

Changes to IP configuration mode

12 [name] (ctx-ip)[router]# interface <if-wan>

Enters WAN interface configuration mode

13 [name] (if-ip)[<if-wan>]# use profile service-

policy <name-in> in

Assigns the downlink profile on the WAN inter-
face.

14 [name] (if-ip)[<if-wan>]# use profile service-

policy <name-out> out

Assigns the uplink profile on the WAN interface.