Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Configuring call routing

SmartWare Software Configuration Guide 

Selecting PCM law compression
The PCM law-select specifies the voice characteristic compression curve. Two values are possible: a-Law (used 
in Europe) and µ-Law (used in the USA).

Procedure: To set the general CS parameters

Mode: System

Configure: General CS settings

The following example configures the general CS parameters

node>enable
node#configure
node(cfg)#system
node(sys)#clock-source 1 0
node(sys)#ic voice 1
node(ic-voice)[1]#pcm law-select aLaw
node(ic-voice)[1]#exit

Calls through a SmartNode can be routed according to a set of routing criteria. The entity that manages call 
routing is called the call router. Calls are routed from one CS interface to another. The call router determines 
the destination interface for every incoming call. It supports complex call routing and call property manipula-
tion (e.g. number manipulation) functions. See chapter 40,

Call routing occurs in the context CS element between several CS interfaces. Accordingly, a CS context and 
two or more CS interfaces must be created. 

Generates the reference clock internally 
or specifies a specific port to receive the 
reference clock.

Changes to ic_voice mode.

Selects the PCM aLaw for Europe or 
uLaw for USA.