Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Call router configuration task list

SmartWare Software Configuration Guide 

Example: Configure address completion timeout

node[switch]#digit-collection timeout 3
node[switch]#digit-collection terminating-char *

Configures the digit collection timeout to 3s. The digit-collection timeout can be stopped by the user entering 
the asterisk (*) character.

The called and calling party numbers in an ISDN signaling message are of a defined number type; national, 
international or unknown. Depending on where the message originates (PSTN, mobile network, PBX) this 
number type may differ. 

 illustrates the three number types.

The missing prefix in the national and international number types can complicate the call router configuration, 
so SmartWare offers the possibility to expand these numbers before entering the first call router table. 

The configured prefix is not removed at the exit of the call router (i.e. when 
a destination interface is found), but the number has the number type 
unknown. 

Procedure: To configure number prefix

Mode: Context CS

Example: Configure number prefix

node[switch]#national-prefix 0041

Input: 99888xxxx Result: 004199888xxxx

node[switch]#international-prefix 00

Input: 4199888xxxx Result: 004199888xxxx

Table 16. ISDN number types

unknown

as dialed with all leading zeros or other prefix numbers 0041 99 888xxxx

national

(area code) (local extension number)

99 888xxxx

international (country code) (area code) (local extension number)

41 99 888xxxx

node(ctx-cs)[switch]#
national-prefix

 prefix

Adds prefix to all E.164 numbers of type national 
before entering the call router.

node(ctx-cs)[switch]#
international-prefix

 prefix

Adds prefix to all E.164 numbers of type interna-
tional before entering the call router.