Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Bind FXS ports to higher layer applications

SmartWare Software Configuration Guide 

An FXS port needs to be associated to an fxs interface in a CS context. The same mechanism of encapsulation 
and binding is used as known for e.g. Ethernet ports (see 

Procedure: To bind an FXS port to an FXS interface of a CS context

Mode: Port FXS

Unlike ISDN, POTS is heavily country specific even though there is a good chance that a phone for one coun-
try works reasonably good in another country. Country specific settings are contained in a so-called fxs profile 
which is integrated in the firmware of the SmartNode. It can be updated independently from the firmware by 
means of tftp download.

As there are more than 190 countries, SmartWare does not support all country parameters, so make sure that 
the country parameter for your country is available as a profile, before you begin operation.

Procedure: Configure country-specific FXS parameters

Mode: Port FXS

Enter configuration mode for FXS port

Sets the encapsulation for the port. cc-fxs designs 
the encapsulation is a context CS interface

Binds the port to an interface in a CS context

Enter configuration mode for FXS port

node(prt-fxs)[slot/
port]#use profile 
fxs profile

Select a profile containing the country specific settings of the port attributes 
(ring voltage etc.). The available country profiles are listed when entering 
this command. The names listed are composed as follows:

ISO3166-1-Alpha-2 2 digit country code
Examples (currently available profiles):

•

Switzerland

•

ETSI EG 201 188 Configuration (Europe)

•

Great Britain

•

Netherlands

•

United States of America/Canada

•

us-115vpp  USA, higher ring voltatge (115 Vpp)

•

South Africa

The default profile (not displayed in the list when entering the command) is etsi.