Patton electronic SmartNode 4110 Series ユーザーズマニュアル
Location Service configuration task list
611
SmartWare Software Configuration Guide
51 • Location Service
Mode: Authentication outbound
Mode: Authentication outbound
Mode: Authentication outbound
Authentication inbound face
The authentication inbound face is used when you want to challenge other user agents.
The authentication inbound face is used when you want to challenge other user agents.
Mode: Identity
An authentication entry establishes a link between an identity and a pair of credentials in an authentication-
service. To link multiple credentials to an identity, there must be one authentication entry in the authentica-
tion inbound face for each pair of credentials to link. The parameter username selects the entry in the authen-
tication-service to use. The parameter username can be omitted if and only if the name of the identity matches
the username in the authentication-service exactly.
service. To link multiple credentials to an identity, there must be one authentication entry in the authentica-
tion inbound face for each pair of credentials to link. The parameter username selects the entry in the authen-
tication-service to use. The parameter username can be omitted if and only if the name of the identity matches
the username in the authentication-service exactly.
Step
Command
Purpose
1
[node](authout)#authenticate authentica-
tion-service <authentication-service> [user-
name <username>]
or
[node](authout)#authenticate <index>
authentication-service <authentication-ser-
vice> [username <username>]
or
[node](authout)#authenticate before
<index> authentication-service <authentica-
tion-service> [username <username>]
or
[node](authout)#authenticate after
<index> authentication-service <authentica-
tion-service> [username <username>]
tion-service <authentication-service> [user-
name <username>]
or
[node](authout)#authenticate <index>
authentication-service <authentication-ser-
vice> [username <username>]
or
[node](authout)#authenticate before
<index> authentication-service <authentica-
tion-service> [username <username>]
or
[node](authout)#authenticate after
<index> authentication-service <authentica-
tion-service> [username <username>]
Adds a new authentication entry to the authentica-
tion outbound face. If more than one authentica-
tion entry has to be entered, the order of the list
can be modified by using the index and/or the
insert keywords before and after.
tion outbound face. If more than one authentica-
tion entry has to be entered, the order of the list
can be modified by using the index and/or the
insert keywords before and after.
Step
Command
Purpose
1
[node](authout)#no authenticate [<index>] Removes the authentication entry at the index or
removes all authentication entries if no index is
given.
given.
Step
Command
Purpose
1
[node](authout)#authenticate none
Removes all authentication entries and disables
explicitly authentication outbound.
explicitly authentication outbound.
Step
Command
Purpose
1
[node](identity)[name]# [no] authentica-
tion inbound
tion inbound
Adds a new face to the identity. The no form of the
command removes an existing face with all content
in it.
command removes an existing face with all content
in it.