Patton electronic SmartNode 4110 Series ユーザーズマニュアル
Location Service configuration task list
613
SmartWare Software Configuration Guide
51 • Location Service
Registration outbound face
The registration outbound face is used to register an identity on an external registrar. Then, the registrar for-
wards calls from the registered identity to your identity.
The registration outbound face is used to register an identity on an external registrar. Then, the registrar for-
wards calls from the registered identity to your identity.
Mode: Identity
Mode: Registration outbound
Mode: Registration outbound
Mode: Registration outbound
Mode: Registration outbound
Step
Command
Purpose
1
[node](identity)[name]# [no] registration
outbound
outbound
Adds a new face to the identity. The no form of the
command removes an existing face with all content
in it.
command removes an existing face with all content
in it.
Step
Command
Purpose
1
[node](regout)# [no] register [auto|none] Enables registration with auto or disables registra-
tion explicitly with none.
Step
Command
Purpose
1
[node](regout)# [no] registrar <host>
[<port>]
[<port>]
Configures the address of the registrar to send
your register requests. When no registrar is config-
ured, the register requests are sent to the first
domain entry in the location-service.
your register requests. When no registrar is config-
ured, the register requests are sent to the first
domain entry in the location-service.
Step
Command
Purpose
1
[node](regout)# [no] lifetime <seconds>
Configures the desired lifetime of the registration.
When no lifetime is configured the desired lifetime
is set to 3600 seconds.
When no lifetime is configured the desired lifetime
is set to 3600 seconds.
Step
Command
Purpose
1
[node](regout)# [no] retry-timeout (on-cli-
ent-error|on-sysstem-error|on-server-
error) <seconds>
ent-error|on-sysstem-error|on-server-
error) <seconds>
Configures the time to wait after a failed registra-
tion according to three different error categories.
After this time we begin to register from new. If no
retry-timeout is configured the retry-timeout is set to
10 seconds.
tion according to three different error categories.
After this time we begin to register from new. If no
retry-timeout is configured the retry-timeout is set to
10 seconds.