Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Basic system management configuration task list

SmartWare Software Configuration Guide 

Several features of the firmware require a system specific license key to be installed to enable the feature. 

This section describes how to install the feature license keys on your equipment. Because license keys comprise 
very long strings of characters, the standard way of installing them is to download the file containing the 
license keys from a TFTP server to the equipment. Therefore, a TFTP server must be present in the IP network 
where you can store the license keys file obtained from the distributor. If no TFTP server is available, the 
license key can also be manually typed (or copied and pasted) in a console or Telnet window. Both procedures 
are described below.

Mode: Configure

Example: Installing license keys from a TFTP server

The following example shows the command used to install license keys, which are stored in a license file on a 
TFTP server.

node(cfg)#copy tftp://172.16.4.3/keystore/myLicense.lic licenses:

Mode: Configure

Example: Installing license keys from the console

The following example shows the command used to install license keys manually on the console.

node(cfg)#install license 10011002R1Ws63yKV5v28eVmhDsVGj/JwKqIdpC4Wr1BHaNtenXUYF/
2gNLoihifacaTPLKcV+uQDG8LJis6EdW6uNk/
GxVObDEwPFJ5bTV3bIIfUZ1eUe+8c5OpCCd7PSAe83Ty2c/
CnZPSlEjIrVlJrr8VhOr1DYxkEV9evBp+tSY+y9sCeXhDWt5Xq15SAPlznTLQmym7fDakvm+zltzswX/
KX13sdkR0ub9IX4Sjn6YrvkyrJ2dCGivTTB3iOBmRjV1u

After installing license keys, you can check if the license keys have been added successfully to your system using 
the following command.

Mode: Configure

Example: Displaying installed licenses

The following example shows the command used to display all installed licenses on a system and a sample of its 
output. 

Downloads the license key file and install the 
licenses.

Install the license key

Repeat step 1 for any additional license keys

Display all installed licenses