Patton electronic SmartNode 4110 Series ユーザーズマニュアル

Basic system management configuration task list

SmartWare Software Configuration Guide 

Mode: Configure

If the system information must have more than one word, enclose it in dou-
ble quotes.

Example: Setting system information

The following example shows the commands used to configure the contact information for your device, if you 
start from the operator execution mode. 

node(cfg)#system contact "Bill Anybody, Phone 818 700 1504"
node(cfg)#system hostname node
node(cfg)#system location “Wiring Closet, 3rd Floor”
node(cfg)#system provider “Best Internet Services, contact@bis.com, Phone 818 700 
2340”
node(cfg)# system subscriber “Mechanical Tools Inc., jsmith@mechtool.com, Phone 818 
700 1402”
node(cfg)# system supplier “WhiteBox Networks Inc., contact@whitebox.com, Phone 818 
700 1212”

The system banner is displayed on all systems that connect to your SmartNode via Telnet or a serial connection 
(see 

). It appears at login and is useful for sending messages that affect administrators and operators, 

such as scheduled maintenance or system shutdowns. By default no banner is present on login.

To create a system banner use the 

 command followed by the message you want displayed. If the ban-

ner message has to be formed out of more than one word the information is enclosed by double quotes. Adding 
the escape sequence “\n” to the string forming the banner creates a new line on the connected terminal screen. 
Use the 

 command to delete the message. 

Mechanical Tools Inc.
jsmith@mechtool.com
Phone 818 700 1402

login: 

Figure 13. System banner with message to operators

Mode: Configure

Sets the contact information to information

Sets the hostname to information

Sets the location information to information

Sets the provider information to information

Sets the subscriber information to information

Sets the supplier information to information

Sets the message for the system banner to message