AT&T TL 74208 ユーザーズマニュアル

Answering system setup

Call screening
You can turn the call screening feature on or off.
Unless you change it, the call screening feature
is set to on.
To change the setting:
1. Press

SETUP twice. The system will announce

“Call screening,” followed by the current
setting, and then “To change the setting, press
SKIP or REPEAT; to continue setup, press
SETUP.”

2. Press

SKIP or REPEAT to change between

on and off.

3. Press

SETUP to save your selection and move

to the next menu option.

-OR-

Press

PLAY/

STOP to save your selection

and exit the menu.

Remote access code
To access your answering system remotely from
any touch tone phone, you need to enter a two-
digit number (10-99). Unless you change it, the
remote access code is 19.
To change the remote access code:
1. Press

SETUP three times. The system will

announce "Remote access code," followed by
the current setting, and then "To change the
setting, press

SKIP or REPEAT; to continue

setup, press

SETUP."

2. Press

SKIP or REPEAT to increase or

decrease the remote access code number by
one. Press and hold

SKIP or REPEAT to

increase or decrease the remote access code
number by 10.