AT&T TL 74208 ユーザーズマニュアル

Answering system setup

Message alert tone
When the message alert tone is set to 

On

, 

and there is at least one new message, the 
telephone base will beep every 10 seconds. 
Unless you change it, the message alert tone is 
set to off. 
To change the setting:
1. Press 

SETUP four times. The system will 

announce "Message alert tone," followed by 
the current setting, and then "To change the 
setting, press 

2. Press 

SKIP or  REPEAT to change between 

on and off.

3. Press 

SETUP to save your selection and move 

to the next menu option. 

 

  Press 

 

STOP to save your selection 

and exit the menu. 

Pressing any telephone base key (except  

HANDSET LOCATOR) will temporarily silence 

the message alert tone. 
If you press   

DELETE in idle mode, there will be 

a voice prompt to direct you to press   

again to delete all old messages, and the 
message alert tone will be temporarily silenced. 
The message alert tone will be re-activated with 
the next incoming message.

The message alert tone will 
beep only if all the conditions 
below are met:

  Answering system is on.
  Message alert tone setting 

is on.

  There are new messages.

Answering system operation

58