AltiGen comm 705 ユーザーズマニュアル

ページ / 56
LCD Messages
38
IP 705 Manual
LCD Messages
Local Menu Configuration Messages
The following messages may be displayed in the LCD when accessing the 
IP 705 phone’s menu:
Register failed
Check to make sure the extension number and 
extension password are set up properly and that the 
system administrator enabled the IP extension.
System administrator should make sure the IP Phone 
Service is started in AltiWare.
If an analog phone or other IP phone is already 
logged on to the same extension, rebooting the IP 
705 will not register the phone successfully. You 
must press #27 on the IP phone to actively log on to 
AltiServ. After the extension is logged on and 
activated, the calls are redirected to this IP phone.
Message
Explanation
conf timeout!
After 2 minutes inside the configuration menu, if no 
action is taken, the LCD will show this message and then 
quit the menu.
conf exception!
During configuration, an unknown exception occurred.
Saved!
The changed configuration was saved into memory.
Write Fail!
Error occurred when saving the changed options into 
flash ROM.
Wrong Ext Number!
The inputted extension number is invalid.
Wrong input!
User inputted an invalid value or string during 
configuration.
wrong password!
User is trying to configure an invalid password from the 
phone menu.