AT&T 3.0 ユーザーズマニュアル
Call Accounting Terminal
Considerations
You can connect only one CAT to the system. You must use a serial printer
such as the CAT printer. You must locate the CAT Plus within the distances
such as the CAT printer. You must locate the CAT Plus within the distances
noted below:
■
Control unit
— 14 ft. (4.27 m) direct connection
— 1000 ft. (305 m) using building wiring
■
Serial printer, 50 ft. (15.2 m)
■
Power supply-grounded wall outlet, 4 ft. (1.22 m)
Hardware Requirements
The following hardware is required for CAT installation:
■
Call Accounting Terminal, CAT Plus
■
Serial printer (AT&T CAT Printer is recommended) connected by a
Z200A EMI cable to the PRINTER jack of the CAT
■
D8W cord and 355AF adapter connecting the SMDR port on the
communications system to the SMDR jack of the CAT
A summary of the installation procedure is provided below:
1 Before connecting the CAT, set the 10 CAT switches to establish the
speed or baud rate for the CAT and its associated printer.
“Connecting a Printer to the Control Unit.” Do not use an outlet that is
controlled by a wall switch.
controlled by a wall switch.
3 Test the CAT Plus, following the instructions provided in the
documentation packaged with the application.
8-8 Installing Applications