Sharp PG-C20X ユーザーズマニュアル

COMPUTER

COMPUTER

AUDIO

AUDIO

OUTPUT

(INPUT 1)

INPUT 1

RS-232C

Plug the supplied power cord into the AC socket on the back of the projector.

You can connect your projector to a computer for projection of full color computer images.

Power cord
CACCU5013DE01

1 Connect one end of the supplied computer RGB cable

to the COMPUTER INPUT 1 port on the projector.

2 Connect the other end to the Monitor output port on the

computer. Secure the connectors by tightening the
thumb screws.

3 To use the built-in audio system, connect one end of

the supplied computer audio cable to the AUDIO INPUT
1 terminal on the projector.

4 Connect the other end to the Audio output terminal on

the computer.

• Before connecting, be sure to turn both the projector and the

computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.

• Please read the computer’s operation manual carefully.
• Refer to page 47 “Computer Compatibility Chart” for a list of

computer signals compatible with the projector. Use with
computer signals other than those listed may cause some of
the functions not to work.

• A Macintosh adaptor may be required for use with some

Macintosh computers. Contact your nearest Authorized Sharp
Industrial LCD Products Dealer or Service Center.

Computer audio cable
QCNW-4870CEZZ

Computer RGB cable
QCNWG0002CEZZ

• Make sure you connect the power cord firmly into the AC  socket.