Sharp PG-C20X ユーザーズマニュアル

COMPUTER

COMPUTER

AUDIO

AUDIO

OUTPUT

(INPUT 1)

INPUT 1

RS-232C

1 Connect one end of the HD-15/RCA cable or the HD-

15-RGB cable to the COMPUTER INPUT 1 port on the
projector.

2 Connect the other end to the corresponding terminals

on the video source.

3 To use the built-in audio system, connect one end of

the audio cable to AUDIO INPUT 1 terminal on the
projector.
Connect the other end to the audio output terminals on
the video source.

• The projector can only accept 480P DTV signals through

COMPUTER INPUT 1 terminal. Therefore, set your DTV to RGB
monitor output.

• The image quality may become lower depending on DTV signal

compatibility.

2 To video output terminals

1 Connect one end of the audio cable to the AUDIO

OUTPUT terminal for INPUT 1 on the projector.

2 Connect the other end to the corresponding terminals

on the audio components.

• Always turn off the projector while connecting to audio

components, in order to protect both the projector and the
components being connected.

• By using external audio components, the volume can be

amplified for better sound.

• The AUDIO OUTPUT terminal for INPUT 1 allows you to output

audio to audio components from the AUDIO INPUT 1 terminal
connected to audiovisual equipment.

COMPUTER

COMPUTER

O

AUDIO

OUTPUT

(INPUT 1)

INPUT 1

To audio input terminals

Audio cable (sold separately)

HD-15-RGB cable (sold separately)

Audio cable (sold separately)

3 To audio output terminals

2 To video output terminals

HD-15/RCA cable (sold separately)