Invacare R121 ユーザーズマニュアル
ACCESSORIES
42
SECTION 8— ACCESSORIES
Reliant Scale RLS6
The Reliant Scale is a compact precision scale system designed specifically for the
Invacare Patient Lift System.
Invacare Patient Lift System.
WARNING
DO NOT install or use this equipment without first reading and understanding
these instructions. If you are unable to understand the Warnings, Cautions or
Instructions, contact a healthcare professional, dealer or technical personnel before
attempting to install this equipment - otherwise, injury or damage may occur.
Removing the Swivel Bar
NOTE: For this procedure, refer to FIGURE 8.1.
1. Remove the shoulder bolt, locknut, pinch guard and washer which secure the swivel
bar to the boom mounting bracket.
NOTE: Save the shoulder bolt and locknut to secure the Reliant Scale to the boom. The pinch guard
will not be used when the scale is installed. Save the pinch guard for future use of the swivel bar
without scale.
will not be used when the scale is installed. Save the pinch guard for future use of the swivel bar
without scale.
NOTE: Removing the swivel bar hardware will release the swivel bar, two nylon washers and the
swivel bar pin. Save the swivel bar pin and the two nylon washers for future use of the swivel bar
without the scale.
swivel bar pin. Save the swivel bar pin and the two nylon washers for future use of the swivel bar
without the scale.
FIGURE 8.1 Removing the Swivel Bar
Boom
NOTE: 600 lift swivel
bar not shown.
bar not shown.
Locknut (Save for
installing Scale)
Boom Mounting
Bracket
Pinch Guard
*450 lb Swivel Bar
Shoulder Bolt
(Save for
installing scale)
Swivel Bar Pin
Nylon Washers
Washer
(Save for
installing scale)