Polycom 1725-36055-001 ユーザーズマニュアル

Cisco: 340 Access Point

PN: 1725-36055-001_G.doc

Introduction

This document details the specifications for configuring the Cisco 340
series access point (AP) with SpectraLink 8000 Wireless Telephones.

Product Summary

Manufacturer: Cisco

Approved product(s) :

Cisco 340

RF technology:

Direct-sequence spread spectrum (DS), 2.4 GHz

AP software version:

11.10T, 12.01T1 †

SpectraLink handset models:

e340/h340/i640

8020/8030

SpectraLink radio mode:

802.11b

Maximum telephone calls per AP:

4 *

AP configuration parameters:

See Access Point Configuration below

Indoor range (typical):

See vendor specifications for AP

Required network topology:

Switched Ethernet

Network constraints:

Dedicated segment for wireless, single subnet

WEP capability:

Yes *

ESSID auto-learn function:

Yes *

† Earlier and later software versions have not been tested for the SpectraLink 8000 SVP Server
compliance, except as noted. Refer to Polycom WLAN Compatibility Table for Field Verified AP software
versions.

* Telephone calls per AP must be configured in the system per documentation provided by Polycom.
WEP and Automatic Learn are programmed into each handset in addition to being configured in the AP.

SpectraLink 8000 Wireless Telephones

SpectraLink 8000 Wireless Telephones use voice over IP (VoIP)
technology on IEEE 802.11b-compatible wireless local area networks
(WLANs). Access points utilize radio frequencies to transmit signals
to and from the SpectraLink 8000 Wireless Telephones.