Pfaff 1183 사용자 설명서

26

Fig. 8 - 07

8

.06 

Start inhibitor

8

.06.01 

Mounting the start inhibitor

 

● Set the machine into the table top.

 

● After loosening screws 2, set switch 1 so 

that it is activated when the sewing head 

is in an upright position.

 

● In this position tighten screws 2.

2

1

8

.06.02 

Checking the start inhibitor function

 

● Switch the machine on at the main switch and tilt back the sewing head.

 

● The error message "Er 0  16" (on MD-4-95-220-CE) or "Error 9 (on Eco- or PicoDrive) must 

appear on the control panel.

 

● If the message does not appear, check the setting of safety switch 2.

 

● After the sewing head has been returned to the upright position, the machine is ready 

for operation again.