Pfaff 1183 Manual Do Utilizador
Installation and commissioning
26
Fig. 8 - 07
8
.06
Start inhibitor
8
.06.01
Mounting the start inhibitor
● Set the machine into the table top.
● After loosening screws 2, set switch 1 so
that it is activated when the sewing head
is in an upright position.
● In this position tighten screws 2.
2
1
8
.06.02
Checking the start inhibitor function
● Switch the machine on at the main switch and tilt back the sewing head.
● The error message "Er 0 16" (on MD-4-95-220-CE) or "Error 9 (on Eco- or PicoDrive) must
appear on the control panel.
● If the message does not appear, check the setting of safety switch 2.
● After the sewing head has been returned to the upright position, the machine is ready
for operation again.