Peerless Industries SA771PU 사용자 설명서

ISSUED: 10-30-09   SHEET #: 095-9299-11  03-22-12

NOTE: If display has a VESA 400 horizontal 
mounting pattern, skip to step 3-4 or 3-5 on page 
11. 

NOTE: For VESA 200x200 or VESA 200x100 
mount hole patterns, skip to step 4 on page 12.

NOTE: For dedicated PLP plate installation skip to 
step 5 on page 14.

Remove four 1/4-20 x .6" screws using 5 mm allen 
wrench (I) and loosen two 1/4-20 x 1.25" screws 
1/2 turn to allow for display bracket adjustment.

To prevent scratching the display, set a cloth on a fl at, level surface that will support the weight of the display. 
Place display face side down and refer to display manufacturers instructions for removing obstructions from the 
back of the display. Adjust display brackets to align with display mounting holes.

Measure horizontal mounting hole pattern and choose fi xed stop-position from chart below.

FIXED STOP-POSTION #2

FIXED STOP-POSTION #1

FIXED STOP-POSTION #3

10-3/4" - 16-1/16" (273 - 408 mm)

#1

15-1/16" - 21-9/16" (383 - 548 mm)

#2

20-7/16" - 27-9/16" (519 - 700 mm)

#3

26-1/16" - 32-9/16" (661 - 827 mm)

#4

FIXED STOP-POSTION #4

1/4-20 x .06" SCREWS

1/4-20 x 1.25" SCREWS