Honeywell UDC 3300 사용자 설명서
264
UDC 3300 Controller Product Manual
4/00
How to remove the
printed wiring boards
from the chassis
printed wiring boards
from the chassis
To remove the printed wiring boards from the chassis, refer to Figure 9-3
and follow the procedure in Table 9-18.
and follow the procedure in Table 9-18.
Table 9-18
Printed Wiring Board Removal from Chassis
Step
Action
1
Remove the chassis from the case as shown in Figure 9-1.
2
Separate the chassis frame at the release points shown in Figure 9-3 and
wiggle each printed wiring board out of its socket on the display/keyboard
assembly. Pull both boards out of the chassis assembly.
wiggle each printed wiring board out of its socket on the display/keyboard
assembly. Pull both boards out of the chassis assembly.
Figure 9-3
Removing the Printed Wiring Boards
Pull printed
wiring boards out
of chassis
wiring boards out
of chassis
Printed wiring
boards
release points
boards
release points
Chassis assembly
Rubber bezel
and window
and window
22639