VXi VT1529A/B 사용자 설명서

The SOURce command subsystem allows configuring output SCPs as well as linking 
channels to output functions.

SOURce

:FM

:STATe 1 | 0 | ON | OFF,(@<ch_list>)
:STATe? (@<channel>)

:FUNCtion

[:SHAPe]

:CONDition (@<ch_list>)
:PULSe (@<ch_list>)
:SQUare (@<ch_list>)

:PULM

:STATe 1 | 0 | ON | OFF,(@<ch_list>)
:STATe? (@<channel>)

:PULSe

:PERiod <period>,(@<ch_list>)
:PERiod? (@<channel>)
:WIDTh <pulse_width>,(@<ch_list>)
:WIDTh? (@<channel>)

:VOLTage

[:AMPLitude] <-offset_v>,(@<ch_list>)

enables the Frequency Modulated 

mode for a PULSe channel.

•

This command is coupled with the SOURce:PULM:STATE command. If the 

FM state is ON then the PULM state is OFF. If the PULM state is ON then the 
FM state is OFF. If both the FM and the PULM states are OFF then the PULSe 
channel is in the single pulse mode.

•

If the channels specified are not on a Frequency/Totalize SCP, an error will 

be generated.

•

Use SOURce:FUNCtion[:SHAPe]:SQUare to set FM pulse train to 50% duty 

cycle. Use SOURce:PULSe:PERiod to set the period.

boolean (uint16)

1 | 0 | ON | OFF

none

string

100 - 163

none