Finisar Brocade Fabric Watch 사용자 설명서

Using Fabric Watch

RAJ sends alarm messages to the remote agent proxy server.

   The RAN alert is only available if the optional Fabric Access license has been purchased 

and turned on.

The Email Alert sends alarms to the corresponding email addresses at run time. The configured 
email address applies to all areas within a class. See fwMailCfg in the Fabric OS Reference Guide. 

This alert only works with firmware images that supports Web Tools.

Whenever the switch is fastbooted or rebooted the Email alert is disabled. The Email Alert 
must be reset after the switch is fastbooted or rebooted.

The configuration of thresholds and alarms can be divided into two categories: threshold values and 
threshold area values.

Timebase changes to thresholds in Env and GBIC agents are disabled. Non-factory 
timebase settings in configuration files for both of these thresholds will not have any effect. 
The factory timebase will be used.

Threshold values apply to the specific threshold. They are not stored in the configuration file, and 
return to the default values if the switch is rebooted. The following threshold values can be 
modified: 

Can be enabled or disabled. Enabled by default.

Allows setting of the event policy to triggered or continuous. Set to 
triggered by default.

The interval between the same type of alarm. Applies only to 
continuous events. The default interval is 1 second.