Nokia IPSO 4.0 사용자 설명서

8. (Optional) From the drop-down list in the Log Level field, select Info. Click Apply.

9. (Optional) Click Up.

10. In the Policies table, enter 

 as the name for a new policy in the New Policy text box. 

Click Apply.

11. In the policies table, click on 

rule_1

. 

The corresponding Configuring Policy page appears to complete the missing parameters of 
the policy.

12. Select 

MD

5-

DES

 from the Add a Proposal drop-down list. Enter 

 in the Priority text box.

13. If no default is selected, select Pre-Shared Secret in the Authentication Method field.

14. Enter a text string, such as 

, in the Enter Shared Secret text box and Shared Secret 

(Verify) text box. Click Apply.

15. Click Up to return to the IPSec General Configuration page. 

Under the IPSec Tunnel Rules table, enter 

 in the New Tunnel field.

16. If Create a logical interface appears, select Yes.

17. Enter 

 in the Local Address text box.

18. Enter 

 in the Remote Address text box. 

Click Apply.

19. Click on the name in Tunnel Rules table. 

The IPSec Tunnel IPSec_tunn page appears.

20. (Optional) Click On to activate Hello Protocol. 

Click Apply. The Hello Interval and Dead Interval text boxes appear.

21. (Optional) Enter 

 as a value in the Hello Interval text box and enter 180 as a value for the 

Dead Interval text box. 

Click Apply.

22. From the drop-down list in the Select Policy field, select rule_1. 

Click Apply.

A new table, Linked Policy, appears.

23. Select 

SITE

_A from the Source Filters drop-down list.

24. Select site_B from the Destination Filters drop-down list.

25. Click Apply.

26. Click Save to make your changes permanent.